[wc_img img=”/wp-content/themes/mk/images/product1.jpg” url=”/150-series” text=”150 SERIES”]
[wc_img img=”/wp-content/themes/mk/images/product9.jpg” url=”/300-series” text=”300 SERIES”]
[wc_img img=”/wp-content/themes/mk/images/product2.jpg” url=”/750-series” text=”750 SERIES”]
[wc_img img=”/wp-content/themes/mk/images/product3.jpg” url=”/950-series” text=”950 SERIES”]
[wc_img img=”/wp-content/themes/mk/images/product4.jpg” url=”/in-wall” text=”IN-WALL”]
[wc_img img=”/wp-content/themes/mk/images/product5.jpg” url=”/m-series” text=”M SERIES”]
[wc_img img=”/wp-content/themes/mk/images/product6.jpg” url=”/mk-movie” text=”M&K MOVIE”]
[wc_img img=”/wp-content/themes/mk/images/product7.jpg” url=”/subwoofers” text=”SUBWOOFERS”]
[wc_img img=”/wp-content/themes/mk/images/product8.jpg” url=”/x-series” text=”X SERIES”]
MK_feb2016_iw28s_C

Frameless Architectural speakers

The M&K Sound Frameless Architectural in-wall loudspeaker range consists of open baffle designs as well as sealed box versions of the brand’s popular satellite and on-wall models to provide wide flexibility in terms of applications and acoustic preferences. The series maintains the sonic integrity that has made M&K Sound a legend for over four decades.Unlike other in-wall makers, M&K Sound employs the exact same drivers and crossover technologies found in our acclaimed professional and consumer reference monitors to deliver consistent sound coverage throughout the room for superior imaging in stereo and surround, even when the speakers are fitted in the ceiling. M&K Sound drive units represent the culmination of decades of intensely focused transducer innovation. Timbre MatchingThe ambitious goal of the latest M&K Sound Architectural in-wall range has been to counterbalance the inevitable acoustic consequences of reducing internal volume to 20 – 30% of a normal cabinet, while preserving the celebrated neutrality, realism and musicality that are the signature of M&K Sound. This level of tonal consistency and timbre matching offers unique flexibility and the opportunity to mix and match speakers from across the entire M&K Sound line-up.

Colors:
Black Metal

Grill:
White and Paintable
Impedance:
4 Ohm

Bass Drivers:
2 x 8″ paper pulp

Frequency Response:
28 Hz – 200 Hz, ± 3dB

Sensitivity (drive signal 100mVolt VA500 amp):
88 dB/1m

Grille Dimensions (HxW):
24.48 x 12.44” / 622 x 312 mm

Baffle Dimensions (HxW)t:
24.25 x 12.04”, 616 x 306 mm

Wall Cutout (HxW):
22.84 x10.62”, 580 x 270 mm

Mounting Depth:
3.74”, 95 mm

Weight:
11 kg / 24,2 lbs

 

IW Series Brochure

Read about the whole series in the IN-Wall series brochure


sealed_enclosure_badge_WEB

 

 IW28S In-Wall Subwoofer

More than four decades of experience and insight have been applied to the design of this truly invisible subwoofer, based on high-performance 8” woofers specially developed for the M&K Sound V Series subwoofers and ingeniously adapted to meet the extreme demands of shallow, flush-mount installation while delivering the quantity and quality of deep bass that consumers and professionals alike expect and demand from M&K Sound, originators and innovators in subwoofer design.

MK_feb2016_iw28s_A web


MK_feb2016_iw28s_D web

M&K Sealed In-Wall Boxes

The materials, acoustic properties, assembly and volume of every M&K Sound sealed box are all known factors during system design, so that the construction of the wall, the type of materials inside the wall and the volume of air behind the speaker all have no impact on final performance. It is this extreme level of control over the interaction of speaker and wall that makes it possible for M&K Sound to offer designer-friendly, invisible installation at no sacrifice in ultimate musicality.

M&K Sound back boxes of 18mm MDF are painted with black structure polyurethane lacquer for moisture resistant sealed surfaces. The sealed box also provides effective protection against dust, insects and vermin. Damping pads on the rear panel eliminate vibration when in direct contact with the wall in shallow installations. All mounting hardware is pre-fitted to the box, including metal clamps to fix speaker wire in the pre-cut cable groove on the rear of the box. Gold-plated push-on terminals with +/- polarity markings allow easy cable connection without the use of tools. Torx mounting screws with special washers are used for smooth mounting along with a practical, efficient, self-tightening dog ear clamp system for a perfect seal between baffle and wall.



MK_feb2016_va500_C

Dedicated Amplifiere.

This dedicated Class D power amp with high efficiency, cool running and low standby voltage consumption is a further development of the amplifiers built into the popular M&K Sound V Series subwoofers. The Class D switch mode power module is designed with effective power reserves to effortlessly deliver copious amounts of clean power to the IW28S in-wall sub for extraordinary, uncompromising handling of demanding deep bass transients.

Colors:
Black Metal
Continuous Output Power:
500W/4 Ohm, Class D

Peak Output Power:
800W/4 Ohm

System Preamp:
Analog

Line-Level Connections:
Phono In, Phono Passthrough Out

Speaker Connections:
5-way binding posts

Controls:
Volume, Phase, Crossover

EQ Switch:
3-Position Room Adaptation:

1. For one sub placed away from corners

2. For one sub placed near a corner

3. For one or two subs placed in corner(s)


Input Voltage:
100-240 VAC (switchable), Auto On/Off

Dimensions (WxHxD)
16.88 x 1.74 x 8.81“ / 429 x 44,4 x 224 mm

Dimensions (WxHxD) Rack size:
19 x 1.74 x 8.81“ / 483 x 44,4 x 224 mm

Weight:
4 kg / 8,8 lbs

IW Series Brochure

Read about the whole series in the IN-Wall series brochure.


Dedicated Amplifier

his dedicated Class D power amp with high efficiency, cool running and low standby voltage consumption is a further development of the amplifiers built into the popular M&K Sound V Series subwoofers. The Class D switch mode power module is designed with effective power reserves to effortlessly deliver copious amounts of clean power to the IW28S in-wall sub for extraordinary, uncompromising handling of demanding deep bass transients. The classic M&K analog input board ensures soft clipping, dynamic driver control. Stereo inputs and line-level passthrough connections provide valuable flexibility for system building and future expansion. For perfect sonic integration with any satellite system, VA500 incorporates adjustable gain control including a fixed level position for reference set-up

MK_feb2016_va500_A


MK_feb2016_va500_D
The amp is one standard rack unit high and is supplied with removable handles for mounting in a 19” pro rack and feet for stand-alone placement.